| Autor: |
Rocio Mora, Jose Antonio Martín-Jiménez, Susana Lagüela, Diego González-Aguilera |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Applied Sciences, Vol 11, Iss 4, p 1465 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2076-3417 |
| DOI: |
10.3390/app11041465 |
| Popis: |
Total and automatic digitalization of indoor spaces in 3D implies a great advance in building maintenance and construction tasks, which currently require visits and manual works. Terrestrial laser scanners (TLS) have been widely used for these tasks, although the acquisition methodology with TLS systems is time consuming, and each point cloud is acquired in a different coordinate system, so the user has to post-process the data to clean and get a unique point cloud of the whole scenario. This paper presents a solution for the automatic data acquisition and registration of point clouds from indoor scenes, designed for point clouds acquired with a terrestrial laser scanner (TLS) mounted on an unmanned ground vehicle (UGV). The methodology developed allows the generation of one complete dense 3D point cloud consisting of the acquired point clouds registered in the same coordinate system, reaching an accuracy below 1 cm in section dimensions and below 1.5 cm in walls thickness, which makes it valid for quality control in building works. Two different study cases corresponding to building works were chosen for the validation of the method, showing the applicability of the methodology developed for tasks related to the control of the evolution of the construction. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
