| Autor: |
Meng Huang, Yupeng Ying, Baixin Liu, Yuzhen Lv, Bo Qi, Chengrong Li |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
High Voltage, Vol 6, Iss 1, Pp 42-50 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2397-7264 |
| DOI: |
10.1049/hve.2019.0272 |
| Popis: |
Abtsract Oil–paper composite insulation (OPCI) is used as the main insulation material in the converter transformer. However, the dielectric properties of insulating oil and oil‐impregnated paper are markedly mismatched under direct current (DC) voltage, resulting in an unbalanced distribution of voltage, which is considered to be a major cause of large insulation margin but frequent failures. Therefore, it is necessary to adjust the voltage distribution in OPCI to enhance its breakdown strength. In this work, surface‐treated TiO2 nanoparticles were employed to modify OPCI. The polarisation current tests revealed that by changing the additive amount of nanoparticles, the polarisation intensities of both oil and oil‐impregnated paper could be adjusted. Based on this, a model taking relaxation polarisations into full consideration was established to analyse the voltage distribution in OPCI and predict the optimal concentration. The prepared OPCI with the concentration of 0.02 g/L has desired balanced voltage distribution due to the influence of nanoparticles on interface charge, and therefore high breakdown strengths under both DC voltage and polarity reversal voltage, which can be increased by 22.6% at most. This work puts forward a novel idea to improve insulation property of OPCI and provides a reference for broader application of nanomaterial in power equipment. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
Plný text