Influence of methyl methacrylate as an acrylic binder on a green machining of alumina ceramics
| Autor: | Maja Kokunešoski, Dušan Kićević, Đorđe Šaponjić, Svetlana Ilić, Adela Egelja, Aleksandra Šaponjić |
|---|---|
| Jazyk: | English<br />Serbian |
| Rok vydání: | 2019 |
| Předmět: | |
| Zdroj: | Zaštita Materijala, Vol 60, Iss 2, Pp 157-161 (2019) |
| Druh dokumentu: | article |
| ISSN: | 0351-9465 2466-2585 |
| DOI: | 10.5937/zasmat1902157K |
| Popis: | Investigated the possibility of using methyl methacrylate (MMA) as an acrylic binder in the preparation of ceramic powder of alumina for pressing with the intention of improving machinability of alumina flakes. Compared the properties of the green bodies and the properties of their corresponding sintered samples that are prepared with and without acrylic binder. The achieved higher density of green bodies with MMA (2.35 g/cm3) compared to green bodies without MMA (2.11 g/cm3) were formed under the optimal pressure of 60 MPa, indicating the improved packing of alumina powder with addition of acrylate. In the case of sintered samples, the porosities were increased, and the density and percentage of linear shrinkage were reduced. It has been shown that machining of green bodies, prepared with MMA, can be produced in the form of complex ceramic products of alumina like a screw with a nut and with great possibilities of commercial application. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|