| Autor: |
Radojković Bojana M., Hribšek Marija F., Ristić Slavica,S. |
| Jazyk: |
English<br />Serbian |
| Rok vydání: |
2010 |
| Předmět: |
|
| Zdroj: |
Hemijska Industrija, Vol 64, Iss 3, Pp 233-237 (2010) |
| Druh dokumentu: |
article |
| ISSN: |
0367-598X |
| DOI: |
10.2298/HEMIND091221027R |
| Popis: |
In this paper the possibilities of applying sensors based on filters with surface acoustic waves (SAW) for the detection of harmful products in welding processes are analyzed. This review discusses the sensing mechanism and configurations of the sensors. The principles of SAW sensors are considered with special emphasis on the application of conducting polyaniline nanocomposites as sensitive thin layers in sensors for the detection of CO, NO2, and COCl2. The literature suggests the use of In2O3 as a dopant for CO and NO2 detection sensors, and ethylenediamine and phenylenediamine in COCl2 sensors. The paper presents original results of modeling of sensors that are designed for detection of CO and NO2 for which there are experimental data in the literature. The results obtained based on this model are in excellent agreement with results from the literature, which shows the validity of modeling. Based on the developed modeling methods, calculations were done for sensors for the detection of these gases in which the structure was the surface of quartz. From these modeling results it can be concluded that the use of the quartz substrate provides better sensitivity. In addition, the quartz sensors are thermally stable. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
