Picosecond Pulse Tapered Fiber Amplifier Operated near 1030 nm with Peak Power up to 1 MW

Autor: Egor K. Mikhailov, Konstantin K. Bobkov, Andrey E. Levchenko, Vladimir V. Velmiskin, Dmitry V. Khudyakov, Svetlana S. Aleshkina, Tatiana S. Zaushitsyna, Mikhail M. Bubnov, Denis S. Lipatov, Mikhail E. Likhachev
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Photonics, Vol 10, Iss 12, p 1385 (2023)
Druh dokumentu: article
ISSN: 2304-6732
DOI: 10.3390/photonics10121385
Popis: We demonstrated an optimization of a picosecond fiber amplifier based on Yb-doped tapered fiber in a spectral range of 1030 nm. Nonlinear effects limiting peak power scaling (stimulated Raman scattering and four-wave mixing) were studied and factors affecting their threshold were established, such as gain, diameter profile along the length of taper, output mode field diameter, and numerical aperture of a pump. By determining the optimal amplification regime and manufacturing advanced tapered fibers, we amplified 13 ps pulses to a record-high peak power of 1 MW at a wavelength of 1029 nm directly at the output of the fiber at an average power of 13.8 W. Four-wave mixing was the limiting factor, and the total fraction of deleterious components in the output spectrum was ~2%. The quality of the output beam was close to being diffraction limited (M2 < 1.2).
Databáze: Directory of Open Access Journals