| Autor: |
E. Lopez-Martinez, M. Mohedano, E. Matykina, R. Arrabal |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Materials Research and Technology, Vol 31, Iss , Pp 1786-1796 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2238-7854 |
| DOI: |
10.1016/j.jmrt.2024.06.171 |
| Popis: |
Plasma electrolytic oxidation (PEO) coatings were developed on an additively manufactured Al10SiMg alloy pre-treated with hard anodizing (HA). The influence of α−Al2O3 particles incorporated during PEO was evaluated in terms of energy consumption, coating morphology, composition and wear behaviour. Combining a 20 μm-thick HA precursor and a PEO electrolyte with suspended α−Al2O3 particles resulted in the highest energy savings (∼60%). Wear volume loss measurements and wear track characterization revealed that the PEO coating with added particles (PEOP) outperformed the coating without particles and a conventional hard anodizing layer. This superiority was attributed to the partial sealing of the outer porous layer by the incorporated α−Al2O3 particles as well as the reduced SiO2 content and the formation of a W-rich tribolayer on the wear track surface. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
