Safety Audit of Band Saw in Manufacturing Organization
| Autor: | Martin Kotus, Erika Jankajová, Katarína Lestyánszka Škůrková, Darina Matisková, Martin Zach |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, Vol 64, Iss 2, Pp 467-471 (2016) |
| Druh dokumentu: | article |
| ISSN: | 1211-8516 2464-8310 |
| DOI: | 10.11118/actaun201664020467 |
| Popis: | This paper deals with the verifying of safety status for a selected device in the manufacturing organization. The safety audit of band saw was realized in the manufacturing process. Safety requirements of the machinery for cutting material are given in the standard STN 20 0723. This standard from the point of view of the work safety defines selected requirements for sawing, cutting compounds and the using of prevention to work with cutting compounds. Among the basic requirements belong material clamping and security services for cut, band saws and jaws wear, as well as the required protective cover. The efficiency of audit in percentage was evaluated by the level of fulfilment as follows: fulfilled (A) mostly fulfilled (AB), conditionally fulfilled (B) or unfulfilled (C). Through safety audit, were defined the weaknesses that increase the degree of employee health hazard. There were proposed corrective actions to eliminate weaknesses and retraining employees. It is still needed to perform the safety audit due to reduction of the probability of occupational injury. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|