Strength Development and Environmental Impact of Waste-Glass-Based Cements Activated with Portland Cement, NaOH, Na-Silicate or Na-Carbonates at Ambient Temperature

Autor: Louise Lemesre, Rachida Idir, Martin Cyr
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Materials, Vol 17, Iss 20, p 5097 (2024)
Druh dokumentu: article
ISSN: 1996-1944
DOI: 10.3390/ma17205097
Popis: This paper presents an experimental approach to the study of the compressive strength, isothermal calorimetry and life cycle assessment (LCA) of alkali-activated pastes based on soda–lime–silica glass, established to investigate the effect of the nature and proportion of the activator. Four different activators are compared: Portland cement, sodium silicate, sodium carbonate (at four percentages by weight: 5, 10, 15 and 25 wt% relative to glass) and sodium hydroxide (3.5 wt%). Portland cement and sodium carbonate were added in dry form (powder), while sodium hydroxide (pellets) and silicate were used in solution. At room temperature, glass exhibited slow reaction kinetics, with mechanical performance increasing significantly beyond 28 days of curing. The nature of the activator had a direct impact on the mechanical performance of the activated glass. Cement-activated pastes and those containing 25 wt% of sodium carbonate developed strength at an early age (0–7 days). The other activators showed lower strength development before 28 days of reaction. While a higher activator content improved short-term performance, it also increased the environmental impact, primarily due to the activator. The LCA, conducted on 11 indicators, revealed that the environmental impact was largely driven by the type and amount of activator used. A performance impact indicator (PII) related to global warming was introduced to compare pastes with different performance values. At an early age (0–28 days), the PII was lower when the activator level was high but decreased over time as the strength improved. In terms of long-term performance (360 days), hydroxide and sodium carbonate (10 wt%) achieved compressive strengths of 91 and 74 MPa, respectively. These systems offered a balance between high performance and a reduced environmental impact, making them of interest for sustainable applications.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje