Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials
| Autor: | Cristina Alia, María V. Biezma, Paz Pinilla, José M. Arenas, Juan C. Suárez |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2013 |
| Předmět: | |
| Zdroj: | Advances in Materials Science and Engineering, Vol 2013 (2013) |
| Druh dokumentu: | article |
| ISSN: | 1687-8434 1687-8442 |
| DOI: | 10.1155/2013/869075 |
| Popis: | The adhesives used for applications in marine environments are subject to particular chemical conditions, which are mainly characterised by an elevated chlorine ion content and intermittent wetting/drying cycles, among others. These conditions can limit the use of adhesives due to the degradation processes that they experience. In this work, the chemical degradation of two different polymers, polyurethane and vinylester, was studied in natural seawater under immersion for different periods of time. The diffusion coefficients and concentration profiles of water throughout the thickness of the adhesives were obtained. Microstructural changes in the polymer due to the action of water were observed by SEM, and the chemical degradation of the polymer was monitored with the Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The degradation of the mechanical properties of the adhesive was determined by creep tests with Mixed Cantilever Beam (MCB) specimens at different temperatures. After 180 days of immersion of the specimens, it was concluded that the J-integral value (depending on the strain) implies a loss of stiffness of 51% and a decrease in the failure load of 59% for the adhesive tested. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|