Response Surface Methodology and Artificial Neural Network modellings on hydraulic and thermal performances of a disk-shaped heat sink with tree-like microchannels
| Autor: | Fangyuan Li, T. Ch. Anil Kumar, Yasser Elmasry, Pradeep Kumar Singh, Azher M. Abed, Abeer D. Algarni, Van Nhanh Nguyen, Makatar Wae-hayee, Phuoc Quy Phong Nguyen, Ahmed M. Galal |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Case Studies in Thermal Engineering, Vol 40, Iss , Pp 102539- (2022) |
| Druh dokumentu: | article |
| ISSN: | 2214-157X 79306225 |
| DOI: | 10.1016/j.csite.2022.102539 |
| Popis: | To cope with the increasing heat generation resulting from increased power in micro-scale devices, an optimum design of a tree-like microchannel heat sink is suggested utilizing Artificial Neural Networks (ANN) and Response Surface Methodology (RSM). Based on the numerical finite volume model, both ANN and RSM models were trained, and their performances were assessed using four distinct performance criteria. The results showed that both of the models are reliable for the purpose of this study, showing a significantly high adjusted R2 for both performance control variables pressure drop (ΔP) and Nusselt number (Nu). The adjusted R2 values observed for the RSM were 0.987 and 0.997, respectively, for the Nu and ΔP. These values were calculated as high as 0.997 for Nu prediction and 0.997 for ΔP prediction using the ANN. Finally, utilizing the calibrated RSM and ANN models, three optimum design configurations for three different purposes given the priority requirements of the heat sink implementations were suggested. The minimum ΔP configuration is suitable for the longevity of the heat sink, and the maximum Nu configuration is suitable for applications where heat transfer performance is more critical. For a balanced optimum design, the efficiency index was maximized. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|