| Autor: |
Meyer Zygmunt, Stachecki Kamil |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Architecture, Civil Engineering, Environment, Vol 16, Iss 2, Pp 119-126 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2720-6947 |
| DOI: |
10.2478/acee-2023-0021 |
| Popis: |
In this paper authors have described the analytical method of continuous static load test Q-s curve conversion for any given pile. Authors have used data sets from static load tests conducted by Energopol Szczecin S.A. in a full range of loads which allows to use of measured values of pile maximum bearing capacity and determine relation between it and pile length and diameter. All the piles used in this paper were CFA piles bored in mostly loam soil conditions. The research described in this work was based on the Meyer-Kowalow method (M-K method) of static load test interpretation. The M-K method allows for a full description of the load-settlement relation, as a continuous curve (M-K curve) using three parameters that described pile-soil interaction. As a result of conducted research relations between parameters describing M-K curve and pile dimensions were established, which allows for a practical application of the proposed method. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
