Study on cold spinning deformation behavior and load mechanism of conical thin-walled aluminum alloy parts
| Autor: | L. B. Li, J. B. Zheng, X. D. Shu, J. Zhang, W. W. Shen |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Metalurgija, Vol 62, Iss 3-4, Pp 383-386 (2023) |
| Druh dokumentu: | article |
| ISSN: | 0543-5846 1334-2576 |
| Popis: | Aiming at the problem that the wall thickness uniformity of conical thin-walled aluminum alloy parts formed by single-pass spinning is difficult to control, this paper systematically studies the influence of different spinning parameters on the material evolution law and load mechanism during the forming process of 1070 thin-walled aluminum alloy. The effects of slab thickness, roller gap and feed ratio on the macroscopic forming quality and mechanical load of 1070 thin-walled aluminum alloy conical parts were simulated by Simufact.forming software. Finally, the optimal spinning parameters of 1070 thin-walled aluminum alloy conical parts were obtained. The final results show that increasing the diameter-thickness ratio of the blank can prevent wrinkling, and reasonable spinning parameters can improve the uniformity of the wall thickness of the product. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|