| Autor: |
Szeliga D., Kuziak R., Kopp R., Smyk G., Pietrzyk M. |
| Jazyk: |
angličtina |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Archives of Metallurgy and Materials, Vol 60, Iss 4, Pp 3087-3094 (2015) |
| Druh dokumentu: |
article |
| ISSN: |
2300-1909 |
| DOI: |
10.1515/amm-2015-0494 |
| Popis: |
The paper deals with the problem of identification of microstructure evolution model on the basis of two-step compression test. Classical interpretation of this test assumes uniform fields of strains, stresses and temperatures in the deformation zone and calculates the coefficients in the model on the basis of force measurements in the second step. In the present paper the inverse approach was applied. Finite element (FE) simulations of the compression test were performed and local values of microstructural parameters were determined accounting for the inhomogeneity of deformation. Objective function was formulated as the Euclid norm for the error between measured and calculated forces for various interpass times. Coefficients in the microstructure evolution model were determined by searching for the minimum of the objective function. Optimized model was validated in simulations of plane strain compression tests. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
