Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging
| Autor: | Dudekula Althaf Basha, Julian M. Rosalie, Hidetoshi Somekawa, Takashi Miyawaki, Alok Singh, Koichi Tsuchiya |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Science and Technology of Advanced Materials, Vol 17, Iss 1, Pp 115-127 (2016) |
| Druh dokumentu: | article |
| ISSN: | 1468-6996 1878-5514 14686996 |
| DOI: | 10.1080/14686996.2016.1140304 |
| Popis: | Microstructural investigation of extremely strained samples, such as severely plastically deformed (SPD) materials, by using conventional transmission electron microscopy techniques is very challenging due to strong image contrast resulting from the high defect density. In this study, low angle annular dark field (LAADF) imaging mode of scanning transmission electron microscope (STEM) has been applied to study the microstructure of a Mg-3Zn-0.5Y (at%) alloy processed by high pressure torsion (HPT). LAADF imaging advantages for observation of twinning, grain fragmentation, nucleation of recrystallized grains and precipitation on second phase particles in the alloy processed by HPT are highlighted. By using STEM-LAADF imaging with a range of incident angles, various microstructural features have been imaged, such as nanoscale subgrain structure and recrystallization nucleation even from the thicker region of the highly strained matrix. It is shown that nucleation of recrystallized grains starts at a strain level of revolution $ N = 1/4 $ (earlier than detected by conventional bright field imaging). Occurrence of recrystallization of grains by nucleating heterogeneously on quasicrystalline particles is also confirmed. Minimizing all strain effects by LAADF imaging facilitated grain size measurement of $ 150\pm 25 $ nm in fully recrystallized HPT specimen after $ N = 5 $. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|