| Autor: |
Donghong Wang, Xingfeng Chen, Jun Liu, Zongqi Liu, Fengjie Zheng, Limin Zhao, Jiaguo Li, Xiaofei Mi |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Sensors, Vol 22, Iss 19, p 7366 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
1424-8220 |
| DOI: |
10.3390/s22197366 |
| Popis: |
Chang’E-3 is China’s first soft landing mission on an extraterrestrial celestial body. The laser Three-Dimensional Imaging (TDI) sensor is one of the key payloads of the Chang’E-3 lander. Its main task is to provide accurate 3D lunar surface information of the target landing area in real time for the selection of safe landing sites. Here, a simplified positioning model was constructed, to meet the accuracy and processing timeline requirements of the TDI sensor of Chang’E-3. By analyzing the influence of TDI intrinsic parameters, a permanent outdoor calibration field based on flat plates was specially designed and constructed, and a robust solution of the geometric calibration adjustment was realized by introducing virtual observation equations for unknowns. The geometric calibration and its absolute and relative positioning accuracy verification were carried out using multi-measurement and multi-angle imaging data. The results show that the error of TDI intrinsic parameters will produce a false obstacle with a maximum height of about 1.4 m on the plane, which will cause the obstacle avoidance system of Chang’E-3 to fail to find a suitable landing area or find a false flat area. Furthermore, the intrinsic parameters of the TDI have good stability and the accuracy of the reconstructed three-dimensional surface can reach about 4 cm after error calibration, which provides a reliable terrain guarantee for the autonomous obstacle avoidance of the Chang’E-3 lander. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
