| Autor: |
H. S. Patil, D. C. Patel, C. S. Patil |
| Jazyk: |
angličtina |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
Fracture and Structural Integrity, Vol 13, Iss 48, Pp 377-384 (2019) |
| Druh dokumentu: |
article |
| ISSN: |
1971-8993 |
| DOI: |
10.3221/IGF-ESIS.48.36 |
| Popis: |
Titanium and titanium alloys can be welded by gas tungsten arc, gas metal arc, plasma arc and electron beam welding processes. Titanium material is a reactive metal and is sensitive to embrittlement by oxygen, nitrogen, and hydrogen gas at elevated temperatures. Consequently, the metal must be protected from atmospheric contamination. This can be provided by shielding the metal with welding grade inert gas. The present work describes the application of TIG arc welding to titanium and investigated the effect of welding parameters like weld current, weld gap and gas flow rate on mechanical properties of welded joints of unalloyed commercially pure titanium Gr-2 materials. Taguchi optimization method has been used to find out optimal setting of parameters for weld joints characterization. The welded joints showed maximum ultimate tensile strength of about 429MPa with percentage elongation of 23.33%. A significant grain coarsening has noticed in the fusion zone consisting of a-phase in different direction bounded by -phase. The hardness value at fusion zone and base metal are typically observed to be 235HV and 145HV respectively. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
