| Autor: |
Michal Baranowski, Lukasz Balewski, Adam Lamecki, Michal Mrozowski |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
IEEE Access, Vol 12, Pp 78275-78285 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2169-3536 |
| DOI: |
10.1109/ACCESS.2024.3408671 |
| Popis: |
This paper introduces a new type of waveguide filter with smooth profile, based on specially designed dual-mode (DM) cavity resonators. The DM cavity design is achieved by applying a shape deformation scheme. The coupling between the two orthogonal cavity modes is implemented by breaking the symmetry of the structure, thus eliminating the need for additional coupling elements. The modes operating in the cavity are carefully analyzed and a scheme for managing the spurious modes is discussed. Two filter prototypes employing the designed DM cavities are developed and described in detail. The first design is a fourth-order bandpass filter (BPF) with a 90° rotated output and a transmission zero (TZ), whereas the second design is an eighth-order filter with four TZs. Both designs are developed, taking into account the limitations of 3D printing technology to enable their single-piece fabrication without internal supports. The structures benefit from additive manufacturing (AM) by having a smooth surface profile and reduced weight, which is often highly desirable for high-power and low-loss applications. Filter prototypes were manufactured using selective laser melting (SLM) from aluminum alloy and tested to validate the designs. Measurement results are consistent with the simulation and prove the validity of the proposed solutions. Both measured BPF prototypes demonstrate low insertion loss, i.e., 0.11 dB and 0.25 dB for the fourth-order and eighth-order designs, respectively. The estimated Q-factors reach 3500 and 4500, which is a very good result for 3D-printed parts. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
