| Autor: |
Chiorescu Dan, Chiorescu Esmeralda, Olaru Sergiu |
| Jazyk: |
English<br />French |
| Rok vydání: |
2018 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 178, p 02011 (2018) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/201817802011 |
| Popis: |
Deep drawing is a very important metal forming process. Thin steel sheet is important material for manufacture of numerous products with deep drawing and stamping. Cold working provides also the possibility of making parts of various shapes, from the simplest to those with a high degree of complexity whose execution through other methods is uneconomical, difficult and sometimes even impossible. In this paper it is analyzed both experimentally and with the help of the finite element, the behavior of the blank during the cylindrical cup deep drawing process, using the ANSYS software program and the finite element method. A comparison is realized between the experimental and the analytical results, elaborating a representative set of problems that analyze the variation of the die punch clearance, movement of the punch and with or without lubrication. The results of the research are useful in developing a sensible design of experiments. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
