Inadvertent Screw Stripping During Ankle Fracture Fixation in Elderly Bone

Autor: A. Feroz Dinah MRCS(Eng), Simon C. Mears MD, PhD, Trevor A. Knight BS, Sandeep P. Soin BS, John T. Campbell MD, Stephen M. Belkoff PhD
Jazyk: angličtina
Rok vydání: 2011
Předmět:
Zdroj: Geriatric Orthopaedic Surgery & Rehabilitation, Vol 2 (2011)
Druh dokumentu: article
ISSN: 2151-4585
2151-4593
21514585
DOI: 10.1177/2151458511401352
Popis: Poor screw purchase because of osteoporosis presents difficulties in ankle fracture fixation. The aim of our study was to determine if cortical thickness, unicortical versus bicortical purchase, and bone mineral density are predictors of inadvertent screw stripping and overtightening. Ten paired cadaver ankles (average donor age, 81.7 years; range, 50-97 years) were used for the study. Computed tomography scanning with phantoms of known density was used to determine the bone density along the distal fibula. A standard small-fragment, 7-hole, one-third tubular plate was applied to the lateral surface of the fibula, with 3 proximal bicortical cortical screws and 2 distal unicortical cancellous screws. A posterior plate, in which all 5 screws were cortical and achieved bicortical purchase, was subsequently applied to the same bones and positioned so that the screw holes did not overlap. A torque sensor was used to measure the torque of each screw during insertion (T i ) and then stripping (T s ). The effect of bone density, screw location, cortical thickness, and unicortical versus bicortical purchase on T i and T s was checked for significance ( P < .05) using a general linearized latent and mixed model. We found that 9% of the screws were inadvertently stripped and 12% were overtightened. Despite 21% of the screws being stripped or being at risk for stripping, we found no significant predictors to warn of impending screw stripping. Additional work is needed to identify clinically useful predictors of screw stripping.
Databáze: Directory of Open Access Journals
Externí odkaz: