| Autor: |
Jonas Baumann, Andreas Wirtz, Tobias Siebrecht, Dirk Biermann |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Journal of Manufacturing and Materials Processing, Vol 4, Iss 3, p 67 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2504-4494 |
| DOI: |
10.3390/jmmp4030067 |
| Popis: |
Milling processes are often limited by self-excited vibrations of the tool or workpiece, generated by the regenerative effect, especially when using long cantilevered tools or machining thin-walled workpieces. The regenerative effect arises from a periodic modulation of the uncut chip thickness within the frequencies of the eigenmodes, which results in a critical excitation in the consecutive cuts or tooth engagements. This paper presents a new approach for disturbing the regenerative effect by using milling tools which are modified with asymmetric dynamic properties. A four-fluted milling tool was modified with parallel slots in the tool shank in order to establish asymmetric dynamic characteristics or different eigenfrequencies for consecutive tooth engagements, respectively. Measurements of the frequency response functions at the tool tip showed a decrease in the eigenfrequencies as well as an increase in the dynamic compliance in the direction of the grooves. Milling experiments with a constant width of cut and constantly increasing axial depth of cut indicated a significant increase in the stability limit for the specific preparations of up to 69%. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
