Pengaruh Sintering Serbuk Batuan Basalt sebagai Bahan Penguat pada Komposit Polyester terhadap Sifat Fisik dan Mekanik
| Autor: | Yusup Hendronursito, Asep Andri Saputra, Tumpal Ojahan Rajaguguk, Slamet Sumardi, Yayat Iman Supriyatna, Kusno Isnugroho, David Candra Birawidha, Muhammad Amin |
|---|---|
| Jazyk: | English<br />Indonesian |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Rekayasa Mesin, Vol 12, Iss 2, Pp 391-399 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2338-1663 2477-6041 |
| DOI: | 10.21776/ub.jrm.2021.012.02.16 |
| Popis: | Basalt rock has great potential in Lampung Province but is only used as a building construction material. Basalt has superior characteristics such as abrasion/wear resistance, compressive strength and chemical reaction resistance making it suitable as a filler or reinforcement for composites. This study aims to determine the effect of basalt rock powder sintering as a reinforcing filler on the mechanical and physical properties of polymer matrix composites. The parameters used included variations in sintering temperature: 8500C, 9500C, and 1.0500C, variations in particle size: 100 < X < 150 mesh, 150 < Y < 200 mesh and 200 < Z < 270 mesh, and the volume fraction comparison of basalt sintering powder and polyester resin. 70: 30%, 80: 20%, and 90: 10%. The experimental design uses the L9 3^3 taguchi orthogonal array run 9 specimens. Taguchi analysis shows that the parameters that affect the mechanical and physical properties are the sintering temperature. sintering temperature contributed 61.77% to wear, and 87.58% to compressive strength, and 95.32% to composite density. The experimental results with the best value obtained a wear value of 0.235 x 10-7mm2 / kg, a compressive strength of 118.873 MPa, and a density of 2.272 gr/cm3. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|