| Autor: |
Angela Mudge, K. Morsi |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Metals, Vol 14, Iss 1, p 120 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2075-4701 |
| DOI: |
10.3390/met14010120 |
| Popis: |
The powder metallurgy (PM) route for the production of closed-cell metallic foams has recently received a significant amount of attention. One of the major issues is the non-uniform and non-spherical nature of the cells produced, which can negatively affect the mechanical behavior. The current paper uses the PM route to process metallic foams for the first time using novel Al-TiH2 foamable precursor “particles” (FPPs). The effect of FPP content (0–10 wt.%) on the developed foam structure of aluminum and its mechanical properties is investigated. An increase in FPP content results in a decline in product density by forming uniform and near-spherical cells. The main advantage of the FPPs is the localization of the blowing agent TiH2 particle content within Al-TiH2 composite particles (i.e., giving rise to a higher local TiH2 content), which has led to the production of pores with relatively high circularities even at very low overall TiH2 contents. The foams produced displayed energy absorption capacities of 10–25 MJ/m3 at 50% strain, and maximum energy absorption efficiencies ranging from 0.6–0.7 (for 40–60% closed cell content) |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
