The effect of various Co contents on the microstructure and properties of Ti(C,N)-TiB-Co cermets prepared in situ via reactive hot pressing
Autor: | Xianrui Zhao, Ze Yu, Dunwen Zuo, Qintao Li, Mengxian Zhang, Hongjun Wang, Qiangyong Zhang, Zhengyu Zhu, Yong Chen, Feng Xu |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2020 |
Předmět: | |
Zdroj: | Advances in Mechanical Engineering, Vol 12 (2020) |
Druh dokumentu: | article |
ISSN: | 1687-8140 16878140 |
DOI: | 10.1177/1687814020925716 |
Popis: | Ti(C,N)-TiB 2 -Co cermets were in situ synthesized, via reactive hot pressing from the Co-Ti-C-BN system, with a Co content ranging from 6 to 22 wt%. The microstructure, relative density, hardness, and fracture toughness of the sintered compacts was investigated by light microscopy, scanning electron microscopy, ceramic densitometry, and Vickers hardness test. The investigations indicate that during hot pressing (compacting pressure = 30 MPa), when the Co content is 14–22 wt%, the metal binder is extruded. Co and Ti are included in the extrudate, breaking the original ratio and deteriorating the properties of the sintered products. As the Co content increases from 6 wt% to 12 wt%, the porosity increases, and the relative density increases from 97.2% to 99.5%. The fracture toughness increases from 6.1 to 6.8 MPa m 1/2 . The Vickers hardness first increases from 1897 HV 10 to the maximum 1960 HV 10 and then decreases slightly to 1945 HV 10 . |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |