| Autor: |
Faris A. Jabbar, Putti Srinivasa Rao |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Archive of Mechanical Engineering, Vol vol. 70, Iss No 4, Pp 457-480 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2300-1895 |
| DOI: |
10.24425/ame.2023.146851 |
| Popis: |
The finite element method (FEM) using Ansys program (APDL) was used in this study to evaluate the idea of tuned vibration absorbers applied to a beam construction for the undamped system. The ideal location for the Dynamic Vibration Absorbers (DVAs) and their numbers to be installed on the fixed-fixed beam in order to lessen beam vibration was also investigated. The DVA was coupled to the fixed-fixed beam vibration node for three vibration modes. The natural frequency and frequency response of the beam were calculated in this study using modal and harmonic analysis, respectively. The vibrational characteristics of the F-F beam with and without DVAs were presented. The simulation results demonstrated that the vibration amplitude decreases in the presence of the DVAs and its reduction depends on the locations of the DVAs and its number. In addition, the attached DVAs affect the structural beam vibration. Depending on the modes of vibration, the vibrational peak is the optimal place to attach DVA. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
