Tensile strength differences between nickel-titanium and titanium molybdenum alloy orthodontic archwire after immersion in detergent toothpaste
| Autor: | Hilda Fitria Lubis, Calvint |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Scientific Dental Journal, Vol 4, Iss 3, Pp 110-114 (2020) |
| Druh dokumentu: | article |
| ISSN: | 2580-6548 2541-321X |
| DOI: | 10.4103/SDJ.SDJ_29_20 |
| Popis: | Background: Titanium-based alloys, such as nickel-titanium (NiTi) and titanium molybdenum alloy (TMA), have gained immense popularity in the last decades. Some toothpaste ingredients can negatively affect orthodontic procedures. Objective: The objective of this study was to examine the differences in tensile strength between NiTi and TMA orthodontic wires after immersion in detergent toothpaste. Methods: Six treatment groups were established, with NiTi and TMA wires immersed in 25 g detergent toothpaste for 4, 8, and 12 h. Tensile strength measurements were carried out using a Tensilon RTF-1350 universal testing machine. Results: The P values of the NiTi and TMA wires were as follows: 0.000 after 4 h, 0.000 after 8 h, and 0.002 after 12 h. These results showed that there were significant differences between the tensile strength of NiTi and TMA orthodontic wires after immersion in detergent toothpaste for increasing periods of time. Conclusion: The tensile strength of NiTi wire was greater than the tensile strength of TMA archwire. However, detergent toothpaste did not have a significant effect on change in tensile strength of NiTi and TMA wire. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|