| Autor: |
Fahri Murat, Osman Yavuz, Muhammed Sefa Temel, İsmail Hakkı Korkmaz, İrfan Kaymaz |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
International Journal of Pioneering Technology and Engineering, Vol 3, Iss 01, Pp 01-06 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2822-454X |
| DOI: |
10.56158/jpte.2024.62.3.01 |
| Popis: |
In this study, the mechanical and physical properties of polyetheretherketone (PEEK) material produced through three-dimensional (3D) printing under different production parameters were investigated. For this purpose, the results obtained by applying heat treatment to the produced samples were examined. Comparisons based on mechanical properties were supported by 3D surface profiles and XRD analyses. According to the obtained results, low nozzle diameter and high printing temperature led to an increase of up to 8% in the elastic modulus and up to 33% in tensile strength of the samples. The heat treatment applied in the study increased tensile strength by up to 8% and elastic modulus by up to 9% in samples produced with a low-diameter nozzle. In conclusion, this study aims to provide a dataset for 3D PEEK designs, intending to enhance the performance of PEEK materials that can be used in medical and industrial applications. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
