Experimental Study for Materials Prosthetic above Knee Socket under Tensile or Fatigue Stress with Varying Temperatures Effect
| Autor: | Hatem Rahim Wasmi, Jumaa Salman Chiad, Adawiya Ali Hamzah |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Journal of Engineering, Vol 20, Iss 3 (2023) |
| Druh dokumentu: | article |
| ISSN: | 1726-4073 2520-3339 |
| DOI: | 10.31026/j.eng.2014.03.08 |
| Popis: | The residual limb within the prosthesis, is often subjected to tensile or fatigue stress with varying temperatures. The fatigue stress and temperatures difference which faced by amputee during his daily activities will produces an environmental media for growth of fungi and bacteria in addition to the damage that occurs in the prosthesis which minimizingthe life of the prosthetic limb and causing disconfirm feeling for the amputee. In this paper, a mechanical and thermal properties of composite materials prosthetic socket made of different lamination for perlon/fiber glass/perlon, are calculated by using tesile test device under varying temperatures ( from 20oC to 60oC), also in this paper a device for measuring rotational bending fatigue stress under varying temperatures was designed, manufactured, and calibrated ( this device is not available in Iraq), to achieve S – N curves for different lamination of perlon/fiber glass/perlon composite materials of prosthetic above knee socket. In this paper, the mechanical and thermal properties set ( E, σy, σult, K, and α ) results of the above composite materials are decreased when the temperatures are increased. The S–N curves results of rotational bending fatigue for these lamination of composite materials are decreased when the temperatures are increased,also the endurance limit stresses (σe) are decreased with the increasing of number of perlon, and increasing temperatures, generaly after about 107 cycles. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|