Study on the CHZ-II Gravimeter and Its Calibrations along Forward and Reverse Overlapping Survey Lines
| Autor: | Haibo Tu, Kun Liu, Heng Sun, Qian Cui, Yuan Yuan, Sunjun Liu, Jiangang He, Lintao Liu |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Micromachines, Vol 13, Iss 12, p 2124 (2022) |
| Druh dokumentu: | article |
| ISSN: | 2072-666X 64862968 |
| DOI: | 10.3390/mi13122124 |
| Popis: | The moving-base gravimeter is one of the key instruments used for Earth gravity survey. The accuracy of the survey data is closely related to the calibration precision of several key parameters, such as the damping delay time, the drift coefficient, the gravity scale factor, and the measurement accuracy. This paper will introduce the development of the CHZ-II gravimeter system in which a cylindrical sampling mass suspended vertically by a zero-length spring acts as a sensitive probe to measure specific force. Meanwhile, a GNSS (Global Navigation Satellite System) positioning system is employed to monitor the carrier motion and to remove the inertia acceleration. In order to achieve high-precision calibrations for the key parameters, a new calibration method performed along forward and reverse overlapping lines is proposed, which is used to calibrate the above parameters and to estimate the measurement accuracy of the instrument used for a normal gravity survey. The calibration principle and the shipboard calibration data processing method are introduced. The calibration was performed for three moving-base gravimeters and the corresponding results are determined, indicating that the method can significantly improve the accuracy of the parameters. For the CHZ-II gravimeter, the measurement accuracy of the survey is 0.471 mGal (1 mGal = 10−5 m/s2), which improved by 19.5% after applying the calibrated parameters. This method is also practical for use with aviation, marine and even vehicle-carried moving-base gravimeters. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|