Autor: |
Ayorinde Tayo Olanipekun, Maledi Nthabiseng, Olusoji Oluremi Ayodele, M.R. Mphahlele, Bob Mpinda Mampuya, Peter Apata Olubambi |
Jazyk: |
angličtina |
Rok vydání: |
2019 |
Předmět: |
|
Zdroj: |
Data in Brief, Vol 27, Iss , Pp - (2019) |
Druh dokumentu: |
article |
ISSN: |
2352-3409 |
DOI: |
10.1016/j.dib.2019.104551 |
Popis: |
The major objective of this work is to study the hardness data at the domain of ferrite and Austenite phases. Nanoindentation and microhardness study has been conducted on austenite and ferrite present in the microstructure of hot rolled and heat treated duplex stainless steel (2205 DSS). Furthermore, Optical microscopy and field emission scanning electron microscope (FE-SEM) were used to identify the microstructural distribution and phases present. Austenite reveals higher nanohardness data value than ferrite, as oppose to ferrite average elastic modulus which is higher than that of austenite. Also, higher value of microhardness data was observed for austenite in comparison with the ferrite at different load application. Keywords: Duplex stainless steel, Ferrite, Austenite, Nanoindentation, Microhardness |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|