Mechanical stress distribution and risk assessment of 110 kV GIS insulator considering Al(2)O(3) settlement

Autor: Hucheng Liang, Boxue Du, Jin Li, Zehua Wang
Jazyk: angličtina
Rok vydání: 2018
Předmět:
Zdroj: High Voltage (2018)
Druh dokumentu: article
ISSN: 2397-7264
DOI: 10.1049/hve.2018.5057
Popis: The growing application of gas insulated switchgear (GIS) in electric power system asks for higher reliability of epoxy (EP) insulators, thus it is important to seek effective methods to improve the operating reliability of GIS insulators. On the basis of the 110 kV GIS insulator, this study studied the aluminium oxide (Al(2)O(3)) settlement in the curing process and the stress distribution of the horizontally laid GIS. Besides, the risk coefficient was defined to evaluate the operating reliability of insulators laid by different methods (I–V). Some conclusions are shown below: the Al(2)O(3) settlement in the curing process causes the insulator density to have a large variation from 2.13 to 2.32 g/cm^3. The Al(2)O(3) content has a great influence on the mechanical performances of EP/Al(2)O(3)system. The first principle stress is localised on the upper interface between the insulator and the conductor, which is the main threat to the mechanical damage of insulator. The laying method V appears to be optimal with a pretty low risk coefficient of 31.5. In actual application, for the horizontally laid GIS, the insulator should be laid with the mould gate downward to improve its mechanical reliability.
Databáze: Directory of Open Access Journals
Externí odkaz: