| Autor: |
Tenzin Pema, Ankit Kumar, Babita Tripathi, Soumya Pandit, Sunil Chauhan, Satyendra Singh, Pritam Kumar Dikshit, Abhilasha Singh Mathuriya, Piyush Kumar Gupta, Dibyajit Lahiri, Ram Chandra Singh, Jigisha Anand, Kundan Kumar Chaubey |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Catalysts, Vol 13, Iss 3, p 618 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2073-4344 |
| DOI: |
10.3390/catal13030618 |
| Popis: |
In this study, multifunctional lithium-doped bismuth ferrite [BiFe1−xLixO3]-graphene nanocomposites (x = 0.00, 0.02, 0.04, 0.06) were synthesized by a sol-gel and ultrasonication assisted chemical reduction method. X-ray diffraction and FESEM electron microscopy techniques disclosed the nanocomposite phase and nanocrystalline nature of [BiFe1−xLixO3]-graphene nanocomposites. The FESEM images and the EDX elemental mapping revealed the characteristic integration of BiFe1−xLixO3 nanoparticles (with an average size of 95 nm) onto the 2D graphene layers. The Raman spectra of the [BiFe1−xLixO3]-graphene nanocomposites evidenced the BiFe1−xLixO3 and graphene nanostructures in the synthesized nanocomposites. The photocatalytic performances of the synthesized nanocomposites were assessed for ciprofloxacin (CIP) photooxidation under UV-visible light illumination. The photocatalytic efficiencies of [BiFe1−xLixO3]-graphene nanocomposites were measured to be 42%, 47%, 43%, and 10%, for x = 0.00, 0.02, 0.04, 0.06, respectively, within 120 min illumination, whereas the pure BiFeO3 nanoparticles were 21.0%. BiFe1−xLixO3 nanoparticles blended with graphene were explored as cathode material and tested in a microbial fuel cell (MFC). The linear sweep voltammetry (LSV) analysis showed that the high surface area of BiFeO3 was attributed to efficient oxygen reduction reaction (ORR) activity. The increasing loading rates of (0.5–2.5 mg/cm2) [BiFe1−xLixO3]-graphene composite on the cathode surface showed increasing power output, with 2.5 and 2 mg/cm2 achieving the maximum volumetric power density of 8.2 W/m3 and 8.1 W/m3, respectively. The electrochemical impedance spectroscopy (EIS) analysis showed that among the different loading rates used in this study, BiFeO3, with a loading rate of 2.5 mg/cm2, showed the lowest charge transfer resistance (Rct). The study results showed the potential of [BiFe1−xLixO3]-graphene composite as a cost-effective alternative for field-scale MFC applications. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
