| Autor: |
Hyelim Kim, Soohyeon Rho, Daeyoung Lim, Wonyoung Jeong |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Fashion and Textiles, Vol 10, Iss 1, Pp 1-19 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2198-0802 |
| DOI: |
10.1186/s40691-023-00351-x |
| Popis: |
Abstract This study fabricated and evaluated the textile-type electrodes for application to smartwear that can measure surface electromyography(sEMG). It was manufactured by lock stitch(LS) and moss stitch(MS), and the stitch distance was prepared as 1, 2, or 3 mm. The surface and compression property was measured by using the Kawabata evaluation system, and the sheet resistance and skin-electrode impedance were analyzed. The coefficient of friction(MIU) of the MS was larger than that of the LS. On the other hand, the geometrical roughness(SMD) showed a smaller value. When the same load was applied, the compressive range of the MS was larger than the LS. When it was manufactured as a leg sleeve and worn, the conductive path could be increased as the loops made of conductive yarn become flat as the loops adhere to the skin by the pressure of clothing. Accordingly, the skin-electrode impedance decreased by increasing the area in contact with the skin. As the results of the RMS(root-mean-square), the LS was higher than the MS in a stable. Nevertheless, the SNR(signal-to-noise ratio) value was lower than that of the MS because movement generated noise during operation. Therefore, more stable signal acquisition is possible when applying MS. It is expected that could be applied to producing smartwear for sEMG measurements with superior sEMG signal acquisition performance while having a softer touch and flexibility. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
Full text from SpringerLink