Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy
| Autor: | V. Rajaei, K. Raeissi, M. Shamanian, H. Rashtchi |
|---|---|
| Jazyk: | perština |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Journal of Advanced Materials in Engineering, Vol 35, Iss 1, Pp 71-81 (2016) |
| Druh dokumentu: | article |
| ISSN: | 2251-600X 2423-5733 |
| Popis: | In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficiency decreased with increasing electrodeposition current density. X-ray diffraction analyses indicated that all coatings were composed of face-centered cubic solid solution of molybdenum in nickel with grain size of 9-5 nanometer. Moreover, the most intensive plane in X-ray diffragtogram was (111). On the othe hand, roughness measurements indicated that surface roughness escalated with increasing current density. Corrosion behavior study showed decrease in corrosion current density of substrate with applying Ni-Mo alloy coatings. In addition, corrosion current density reduced with increasing molybdenum content of the coating and the minimum amount was related to the coating with 13 atomic percent molybdenum. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|