| Popis: |
During the mode-switching process of a hybrid tractor equipped with a hydraulic-mechanical continuously variable transmission (HMCVT) device, the separation and combination of the clutch will cause transient shocks, affecting the smoothness and driving comfort of the entire vehicle. This article conducts simulation and experimental research on the impact problem when switching from pure electric drive mode to hybrid-power speed coupling mode. Firstly, establish a system dynamics model in SimulationX 3.5 software and build a hardware-in-the-loop (HIL) experimental platform. Secondly, a strategy of “clutch oil pressure fuzzy control + motor torque compensation” is proposed to solve the problem of the slow dynamic response of the engine. Finally, the orthogonal experiment range analysis method and variance analysis method are used to optimize the quality of mode switching, with six clutch-switching time sequences as experimental factors. The simulation results show that adopting the strategy of “clutch oil pressure fuzzy control + motor torque compensation” and optimizing the clutch-switching timing can effectively reduce the amplitude of output shaft speed reduction, dynamic load coefficient, and impact, and shorten the switching time. The comparison between the HIL test results and the simulation results shows that there is a certain difference between the two, but the overall trend is consistent, which verifies the effectiveness of the proposed control strategy and method. |
