Experiment sorting of non‐ferrous metals by new orientation of magnetic disk separator
Autor: | Kadri Nadjib, Ahmed Nour El Islam Ayad, Ahmet Fevzi Bozkurt, Kadir Erkan, Muhannad Alshareef, Enas Ali, Reagan Jean Jacques Molu, Sherif S. M. Ghoneim |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2024 |
Předmět: | |
Zdroj: | IET Science, Measurement & Technology, Vol 18, Iss 8, Pp 443-452 (2024) |
Druh dokumentu: | article |
ISSN: | 1751-8830 1751-8822 |
DOI: | 10.1049/smt2.12192 |
Popis: | Abstract Eddy‐current technique has been used in several industrial applications, such as non‐destructive testing and characterization, transmission systems, and separation processes. The main advantage of other separation techniques for eddy current separation is the absence of direct contact and do not use other liquid and water. This paper presents a novel configuration for a single‐disk vertical eddy current separator, covered by alternating permanent magnets. Unlike several other works, which employ a horizontal orientation for magnetic disks. The advantage is that it contains one driving motor, few strong permanent magnets, and a small size and simpler construction than the usual eddy‐current separators. In this work, the analysis of an eddy current separator with magnetic single disk using a numerical model based on finite element method, the obtained partial differential equation is done into the numeric solver. The experimental device was realized to separate two kinds of non‐ferrous waste: aluminium and copper. The experiment results show the effect of speed variation, metals size, and kind of metal on ejection distance. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |