| Autor: |
G Kavitha, Subhash Sonkesriya, K Anil Kumar, Faris Jaser Almutairi, Pravin M Parmar, Anuj Singh Parihar, Tanu Priya Sonkar |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Journal of Pharmacy and Bioallied Sciences, Vol 15, Iss 6, Pp 1329-1331 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
0975-7406 |
| DOI: |
10.4103/jpbs.jpbs_100_23 |
| Popis: |
Objectives: To assess the outcome of implant diameter and length on THE distribution of stress using a three-dimensional (3D) finite elements (FE) analysis, with immediate loading implants. Materials and Methods: This study made use of a 3D FE model of an implant encased in a chunk of bone. The LEADER/ITALIA-Fix type implant was created specifically for immediate loading. To create a solid model of the implant and bone and to carry out the FE analysis, the ANSYS V.12 programme was used. Results: The findings indicated that the neck of dental implants is the area of highest stress for all implant diameters and lengths, with an increase in implant length from 10 mm to 12 mm resulting in a slight raise in stress at the interface of implant-bone, and an increase in diameter from 3.75 mm to 4.25 mm having no appreciable impact on the value of stresses around dental implants. Conclusion: It was concluded that an increase in length has a negative effect on stress, while a diameter increase has no discernible impact on stress values. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
