Towards a Procedure-Optimised Steerable Catheter for Deep-Seated Neurosurgery
| Autor: | Ayhan Aktas, Ali Anil Demircali, Riccardo Secoli, Burak Temelkuran, Ferdinando Rodriguez y Baena |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Biomedicines, Vol 11, Iss 7, p 2008 (2023) |
| Druh dokumentu: | article |
| ISSN: | 11072008 2227-9059 |
| DOI: | 10.3390/biomedicines11072008 |
| Popis: | In recent years, steerable needles have attracted significant interest in relation to minimally invasive surgery (MIS). Specifically, the flexible, programmable bevel-tip needle (PBN) concept was successfully demonstrated in vivo in an evaluation of the feasibility of convection-enhanced delivery (CED) for chemotherapeutics within the ovine model with a 2.5 mm PBN prototype. However, further size reductions are necessary for other diagnostic and therapeutic procedures and drug delivery operations involving deep-seated tissue structures. Since PBNs have a complex cross-section geometry, standard production methods, such as extrusion, fail, as the outer diameter is reduced further. This paper presents our first attempt to demonstrate a new manufacturing method for PBNs that employs thermal drawing technology. Experimental characterisation tests were performed for the 2.5 mm PBN and the new 1.3 mm thermally drawn (TD) PBN prototype described here. The results show that thermal drawing presents a significant advantage in miniaturising complex needle structures. However, the steering behaviour was affected due to the choice of material in this first attempt, a limitation which will be addressed in future work. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|