Theoretical Study of the Motion of a Cut Sugar Beet Tops Particle along the Inner Surface of the Conveying and Unloading System of a Topping Machine

Autor: Simone Pascuzzi, Volodymyr Bulgakov, Ivan Holovach, Semjons Ivanovs, Aivars Aboltins, Yevhen Ihnatiev, Adolfs Rucins, Oleksandra Trokhaniak, Francesco Paciolla
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: AgriEngineering, Vol 6, Iss 1, Pp 409-422 (2024)
Druh dokumentu: article
ISSN: 2624-7402
DOI: 10.3390/agriengineering6010025
Popis: One of the most delicate operations in the sugar beet harvesting process is removing the tops from the heads of the root crops without any mechanical damages. The aim of this study is to improve the design of the conveying and unloading system of the sugar beet topper machine. In this paper, a mathematical model of the motion of a cut beet tops particle M, along the conveying and unloading system, has been developed to support the evaluation of kinematic and design parameters, depending on the rotational speed of the thrower blade, the air flow speed, the required ejection speed of particle M, and the position of the trailer that moves alongside the harvester. It has been established that increasing the speed Va of the top particle M, which has left the end of the blade of the thrower, leads to an increase in the arc coordinate S(t) of its movement along the cylindrical section of the casing. Within the range of the speed change from 4 m·s–1 to 8 m·s–1, the value of the arc coordinate S(t) increases by 1.4 times during time t = 0.006 s. Moreover, a rapid decrease in speed V is observed with an increase in the length x of the discharge chute.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje