Popis: |
Approximately 4.5 billion people worldwide are negatively affected by mycotoxins, especially small-scale farmers in regions that do not have access to energy efficient and appropriately designed drying systems. Mycotoxins are produced by fungi tainting durable commodities (e.g. corn and rice), which have been inadequately dehydrated and stored. Controlling produce dryness to below 0.6 water activity (Aw) is an imperative factor to maintain their safety and quality. Unfortunately, there is a lack of inexpensive, small-scale (w and dry basis moisture content (MD). Desiccants, like hygroscopic salts and DryBeadsTM, can be used to remove the moisture from surrounding commodities and potentially maintain conditions during storage. For small-scale applications, it is important to keep the design low-cost and energy efficient. Utilizing corn (Zea mays) as a model product, the current study aims to evaluate a small-scale desiccant drying system consisting of two stacked 18.9 L (5 gallon) buckets equipped with a centered 51 mm diameter acrylonitrile-butadiene-styrene (ABS) pipe to support a fan (102 mm × 102 mm × 25 mm) to circulate air (mean air-flow = 0.015 m3-s −1, 31.8 cfm). Potassium carbonate (K2CO3), magnesium chloride (MgCl2), sodium iodide (NaI), and DryBeadsTM were compared against an untreated control in their ability to reduce the Aw below 0.6 and hold it over 14 days of storage without over-drying the corn. The small-scale desiccant system combined 0.73 kg of each desiccant and 9 kg of corn with an initial MD of 19.6% (dry basis). Twelve 50 g corn samples contained in mesh bags were distributed at three levels (top, middle, and bottom) within each bucket to later infer the corn’s final MD and Aw. In addition, temperature (T), and relative humidity (RH) at the three levels were recorded each hour with T/RH sensors. Results indicated that all of the evaluated desiccants significantly (p ≤ 0.05) reduced the corn’s Aw below 0.6, in comparison to the untreated control, after 14 days of drying/storage. |