| Autor: |
Eleonora Bruschi, Virginio Quaglini, Luca Zoccolini |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Applied Sciences, Vol 13, Iss 4, p 2063 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2076-3417 |
| DOI: |
10.3390/app13042063 |
| Popis: |
Supplementary energy dissipation has proved to be an effective way of protecting structures from the disastrous effects of earthquakes and has been used in the last decades both in new and in existing constructions. In this regard, various procedures for the design of the damping system for the seismic retrofit of buildings have been formulated over the years, mainly focused on reinforced concrete (RC) constructions, which represent the largest part of the existing stock in many seismic-prone countries. The study deals with the assessment of a displacement-based design procedure for proportioning the damping system recently proposed in the literature for RC framed buildings, with the goal of establishing a good practice for the application of the procedure to steel buildings as well. The method was applied to three case-study frames, regular in plan and in elevation, which were assumed as being representative of old structures designed without consideration of seismic requirements. The retrofit was performed by using chevron braces equipped with dampers with an elastic-perfectly plastic behavior. The method aimed at defining the properties of the dampers to achieve a target performance in terms of the maximum lateral deflection for a specific level of seismic intensity. The effectiveness and reliability of the proposed procedure was eventually assessed by evaluating the seismic performance of the upgraded steel structures in static and dynamic non-linear analyses. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
