Autor: |
Kai Shek Qwah, Esmat Farzana, Ashley Wissel, Morteza Monavarian, Tom Mates, James S. Speck |
Jazyk: |
angličtina |
Rok vydání: |
2022 |
Předmět: |
|
Zdroj: |
APL Materials, Vol 10, Iss 8, Pp 081107-081107-7 (2022) |
Druh dokumentu: |
article |
ISSN: |
2166-532X |
DOI: |
10.1063/5.0098714 |
Popis: |
We report on the improvement of the surface morphology of c-plane GaN films grown at high growth rates (∼1 µm/h) using ammonia molecular beam epitaxy through a series of growth optimizations as well as the introduction of indium as a surfactant. The indium surfactant was expected to help with the adatom mobility and, thus, provide smoother growth surfaces. Through a combination of varying V/III ratios, In flux, and growth temperatures, an optimal condition for surface morphology, characterized by atomic force microscopy, was achieved. At higher Ga fluxes for fast growth rates (∼1 µm/h and beam equivalent pressures of ∼5 × 10−7 Torr), higher ammonia flows were necessary to preserve the surface morphology. In addition, indium was an effective surfactant—reducing the roughness and improving the overall surface morphology. However, excessive indium causes the surface morphology to degrade, potentially due to the enhancement of the Ga desorption from the surface as a result of the reaction of indium with ammonia for high indium fluxes. The indium surfactant also resulted in a reduction of background Si impurity concentrations in the film. These effects allow for the growth of thick drift layers with low background dopant concentrations for vertical GaN power devices. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|