| Autor: |
Jing Zhao, Di Wu, Xiaojie Wu, Ziyang Zhang, Zhiguo Wen, Sinan Liu |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Orthopaedic Surgery and Research, Vol 19, Iss 1, Pp 1-14 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
1749-799X |
| DOI: |
10.1186/s13018-024-04983-7 |
| Popis: |
Abstract Background With orthopedic surgery increasing year on year, the main challenges in bone drilling are thermal damage, mechanical damage, and drill skid. The need for new orthopedic drills that improve the quality of surgery is becoming more and more urgent. Methods Here, we report the skidding mechanism of drills at a wide range of inclination angle and propose two crescent drills (CDTI and CDTII). The anti-skid performance and drilling damage of the crescent drills were analyzed for the first time. Inclined bone drilling experiments were carried out with crescent drills and twist drills and real-time drilling forces and temperatures were collected. Results The crescent drills are significantly better than the twist drill in terms of anti-skid, reducing skidding forces, thrust forces and temperature. The highest temperature is generated close to the upper surface of the workpiece rather than at the hole exit. Finally, the longer crescent edge with a small and negative polar angle increases the rake angle of the cutting edge and reduces thrust forces but increases skidding force and temperature. This study can promote the development of high-quality orthopedic surgery and the development of new bone drilling tools. Conclusion The crescent drills did not skid and caused little drilling damage. In comparison, the CDTI performs better in reducing the skidding force, while the CDTII performs better in reducing the thrust force. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
