| Autor: |
Fresia Paola, Rundo Massimo |
| Jazyk: |
English<br />French |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
E3S Web of Conferences, Vol 197, p 07005 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2267-1242 |
| DOI: |
10.1051/e3sconf/202019707005 |
| Popis: |
The paper presents the lumped parameter model of a pressure limiter for axial piston pumps developed in the Simcenter Amesim® environment. The control includes both the absolute and differential (load sensing) pressure limiter in a single body. The continuous position valve was tested experimentally alone on a test rig in order to estimate the discharge coefficients required for tuning the model. The tests were performed at imposed positions of the spool and the corresponding modulated pressure and control flow through the valve were measured. A contactless transducer was used for measuring with a very high accuracy the spool position. The influence of the bleed orifice on the pressure gain was also measured experimentally. It was found that the discharge coefficients have a significant influence on the hydraulic characteristic of the valve with also a consequence on the dynamic behavior of the entire displacement control. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
