| Autor: |
Torrecilla Marcos Compadre, Weinberg Alan H, Hutton Patrick, Clark Craig |
| Jazyk: |
English<br />French |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
E3S Web of Conferences, Vol 16, p 14001 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2267-1242 |
| DOI: |
10.1051/e3sconf/20171614001 |
| Popis: |
This paper describes a DC to DC converter designed to meet the power supply requirements of the SiREUS Coarse Rate Sensor (CRS) which is a 3-axis MEMS Rate Sensor (MRS) that uses a resonating ring gyro and will be used in different ESA missions. The converter supplies +5V, −5V, 3.3V, 1.8V and 40V and it has been designed and prototyped by Clyde Space Ltd with the EQM and FM units being manufactured by Selex ES. The first model was designed for a 28V un-regulated bus and the second model presented here has been designed for a 50V regulated bus. PWM voltage regulation was not used because of the noise requirements and the regulated input bus allowed an unregulated power stage approach. There are also stringent volume and interface constraints, which also affected the design. For such reasons, a fixed dutycycle, quasi-resonant single-ended topology with output linear regulators has been implemented; having the advantages of providing low switching losses, low radiated and conducted noise and no over-voltage failure mode. This paper highlights the techniques used to satisfy stringent noise and protection requirements of the load. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
