| Popis: |
This study aimed to determine the diclofenac removal in wastewater by sludge taken from an operating wastewater treatment facility. Laboratory experiments were conducted in two parts: batch and moving-bed biofilm reactor (MBBR) experiments. Results from batch experiments showed that 0.1–2 mg L-1 of diclofenac could be removed more than 80% within 72 h, and the removal efficiency reduced to less than 60% for higher concentrations. The increase in the removal rate from 0.00058 to 0.16527 mg L-1 h-1 was observed when the initial diclofenac concentration increased from 0.1 to 10 mg L-1, respectively. The average first-order rate constants of 24-h and 72-h degradation were calculated as 4.71 × 10-2 and 1.99 × 10-2 h-1, respectively. The removal of diclofenac by sludge was mainly from biodegradation by microorganisms in sludge, followed by the adsorption onto the sludge biomass. The addition of various metal ions in the studied range did not significantly increase the diclofenac removal; however, the addition of Ca2+, Co2+, Fe3+, Mn2+, and Zn2+ tended to increase both diclofenac removal rate and efficiency. This positive effect was reduced when the metal ion concentrations were increased up to 0.75 ppm. Lastly, results from an initial phase of continuous MBBR showed that sludge addition during the start-up also extended the diclofenac removal efficiency to one week compared with 3 days in the experiment without sludge addition. In conclusion, the findings show the capability of using activated sludge in diclofenac wastewater treatment by the traditional or alternative systems. |
