| Popis: |
In this investigation, aluminium-silicon-based alloy (LM6) with the addition of (0, 2.5, 5, and 10%) copper-coated short steel fiber and 5% boron carbide (B4C) element-strengthened composites was fabricated by the stir casting method. Mechanical properties and tribological behaviors of LM6-based hybrid composites were investigated, and microstructures of different castings were examined by an image analyzer. The test was conducted at different loads (10, 20, 30, and 40 N) and different sliding spaces (500, 1000, 1500, and 2000 m), respectively. The results revealed that the sample loaded with 10% of reinforcement recorded the highest tensile strength of 231 MPa. On the other hand, the hardness value increased from 71 to 144 BHN, when 15% of reinforcement was added to the sample. It was also noted that 10% copper-coated steel fiber improved wear resistance up to 50% when compared to LM6. A field emission scanning electron microscope was employed to observe the morphology of the worn surfaces of composites at different sliding distances and load conditions. The hybrid composite revealed that the combination of both short steel fibers and reinforcement of ceramic particles enhanced the mechanical properties, obtaining superior wear resistance. |
