| Popis: |
The LNG cargo containment system used in membrane-type LNG cargo tanks must have sufficient dynamic strength to withstand the impact of sloshing loads. However, performing direct dynamic nonlinear transient finite element assessments against design sloshing impact loads with different design specifications can be complicated and time-consuming. To address this, it is effective to use linear superposition methods, such as the triangular impulse response function (TIRF) method, to conduct dynamic transient FE assessments of LNG cargo containment systems. However, as LNG cargo containment systems have a high level of nonlinearities in terms of geometry, material, and boundary effects, it is necessary to evaluate the applicability of the TIRF method in advance. This study investigates the dynamic responses of an LNG cargo containment system using the TIRF method and compares the ultimate value of the structural responses and impulses with that obtained using direct dynamic nonlinear transient assessments. Based on a comparison of a series of FE analyses, the study proposes a design for the partial safety factors for calculating the ultimate bending and shear capacities of an LNG cargo containment system, taking into consideration the dynamic impact of sloshing loads using the TIRF method. Finally, the ultimate shear and bending capacities are calculated using the proposed method and compared with those obtained through direct dynamic nonlinear transient assessments. The results show that the proposed method provides conservative estimates against direct nonlinear finite element simulations, with a difference of around 10% for the mean minus two standard deviations. This approach can be practically applied for early basic design purposes in the shipbuilding industry. |
