| Popis: |
This study investigates the impact of pulse-on-time (TON), current (I), pulse-off-time (TOFF), voltage (V), and tool electrode speed (TES) on material removal rate (MRR), average surface roughness (Ra), power consumption (PC) and surface defects for electrical discharge drilling (EDD) of Waspaloy. Based on a Taguchi design with five factors and four levels, experimental trials reveal TOFF, TON, and TOFF as the most influential factors, contributing 50.45%, 34.29%, and 33.09% to MRR, Ra, and PC, respectively. To address conflicting conditions and optimize responses, non-dominated sorting genetic algorithm-II (NSGA-II), multi-objective genetic algorithm (MOGA), multi-objective grey wolf optimizer (MOGWO), and multi-objective particle swarm optimization (MOPSO) are employed. Comparative analysis of 8 optimal solutions provided by four optimization techniques, which exhibit less than 10% errors in confirmatory experiments, has been done, ensuring better prediction accuracy. MOPSO is preferable to the rest of the optimization techniques due to its lower percentage error. NSGA-II, MOGA, MOGWO, and MOPSO exhibit relative improvement in responses based on confirmatory experiments, establishing them as effective tools for exploring EDD applications. Higher current is confirmed as a primary contributor to increased surface damage through microscopic image analysis, and EDX analysis exposes carbon deposition migration on both the tool and workpiece. |
