| Autor: |
Yani WANG, Shaohe ZHANG, Qian ZHANG, Xiangwang KONG, Tao HE, Dongpeng ZHAO, Hua GAO |
| Jazyk: |
čínština |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Jin'gangshi yu moliao moju gongcheng, Vol 43, Iss 1, Pp 49-58 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
1006-852X |
| DOI: |
10.13394/j.cnki.jgszz.2022.0082 |
| Popis: |
The direct ink writing (DIW) technology of slurry is a 3D printing technology based on slurry extrusion. It has the advantages of low energy consumption, low cost, fast printing speed and no structural design restrictions. On the basis of summarizing the advantages of the application of DIW technology to ceramic-based diamond tools, key steps in the application process, such as the raw material selection, the slurry preparation, the printing suitability, the degreasing and the sintering process, are discussed and the powder agglomeration problem that needs to be given attention to in the slurry preparation process is pointed out. At the same time, some research examples of DIW manufacturing process are analyzed. Finally, it points out the key problems that should be solved in DIW manufacturing ceramic-based diamond tools. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
