| Autor: |
Nooruddin Ansari, Dong-Hyun Lee, E-Wen Huang, Jayant Jain, Soo Yeol Lee |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Journal of Materials Research and Technology, Vol 26, Iss , Pp 2682-2694 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2238-7854 |
| DOI: |
10.1016/j.jmrt.2023.08.015 |
| Popis: |
The present study investigates the anisotropic microstructure, nanomechanical and corrosion behavior of Ti–13Nb–13Zr biomedical alloys, which were fabricated using the direct energy deposition (DED) method. The microstructure of the as-deposited material was studied using a field-emission scanning electron microscope (SEM), electron backscatter diffraction (EBSD) and X-ray diffraction (XRD). We found anisotropic mechanical behavior using nanoindentation from strain rate sensitivity and creep tests. For the maximum load of 50 mN, the x-y plane (normal to the building direction) shows better indentation hardness and lower strain rate sensitivity value (0.014) compared to the x-z plane (0.022) (parallel to the building direction). The difference in the indentation hardness was mainly attributed to the smaller equiaxed prior-β grains and finer α’ martensitic laths on the x-y plane. In terms of creep behavior, the x-y planes show better creep strength than the x-z plane. Meanwhile, both planes show a very high creep exponent, which signifies a similar creep mechanism, i.e., dislocation based. Moreover, we further found the anisotropic corrosion behavior using electrochemical tests. Corrosion results reveal that the x-y plane is more corrosion-resistant than the x-z plane. In summary, the x-y plane of the direct energy deposited Ti–13Nb–13Zr alloy possesses better strength and corrosion resistance due to its finer microstructure. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
